Yes, the same event sometimes trades at different prices on Kalshi and Polymarket, and buying YES on one venue and NO on the other can lock in $1.00 per pair, but only if both contracts settle on the identical outcome. Near even odds, a gap has to be about 3.5¢ to 4.1¢ per pair just to pay both venues' taker fees. Trades that clear that bar still carry settlement-rule, fill and capital risk. For US residents the Polymarket side means Polymarket US, because Polymarket's international site lists the United States as close-only.

We publish Bot for Kalshi, which trades Kalshi only; it does not place orders on Polymarket. Fees below were checked on November 9, 2026 against Kalshi's fee schedule and Polymarket US's fee documentation. Both change, so check them again before you trade.

How Kalshi–Polymarket arbitrage works

Both venues pay $1.00 per winning contract and $0 per losing one. Suppose an event trades at 40¢ YES on Kalshi while the same event's NO trades at 57¢ on Polymarket US. Buy one of each and one of them pays $1.00 whichever way the event goes. You paid 97¢, so the gross edge is 3¢ per pair.

That 3¢ only exists if both markets settle on the same thing. Everything below is about what eats it: two sets of fees, two rulebooks, two order books, and money parked on two venues.

The fees on each side (checked November 9, 2026)

VenueTaker fee100 at 50¢
Kalshi0.07·C·P(1−P)$1.75
Polymarket US0.0695·C·P(1−P)$1.74
Polymarket US Tier 10.095·C·P(1−P)$2.38

C is the number of contracts and P is the price in dollars; Kalshi rounds its fee up. Resting limit orders that fill later (maker orders) cost less:

  • Kalshi: no maker fee on most markets. A listed set of series charges makers a quarter of the taker rate.
  • Polymarket US: no maker fee. Maker rebates start only at $10 million of qualifying maker volume.

Kalshi's fee schedule said no fee changes were scheduled when we checked. Polymarket US's fee page lists 0.0695 as the standard taker coefficient. It also announces volume tiers effective 1:00 PM ET on November 6, 2026: 0.095 below $10,000 of trailing 30-day taker volume, 0.085 below $50,000, 0.075 below $250,000, and 0.0695 at $250,000 or more. New accounts pay 0.0695 for their first seven days. On November 9 the page still described the tiers as upcoming, so confirm which rate your account pays. Polymarket US rounds fees to the nearest cent using banker's rounding. Neither venue charges these fees on orders that are canceled or expire unfilled.

The break-even gap. Near even odds, the two taker fees add up to about 3.5¢ per pair at Polymarket US's standard rate (1.75¢ + 1.74¢) and about 4.1¢ at its Tier 1 rate (1.75¢ + 2.38¢). A smaller gap is a loss before anything else goes wrong. Fees shrink toward the extremes, because both formulas scale with P × (1 − P).

Kalshi's side of this math is covered in more depth in our Kalshi fees guide, and you can try your own prices in the prediction market fee calculator.

Worked example: a 3¢ gap, 100 pairs

Buy 100 Kalshi YES at 40¢ ($40.00) and 100 Polymarket US NO at 57¢ ($57.00). One side pays $100.00 whichever way the event settles. The two columns are Polymarket US's two taker rates.

100 pairs0.06950.095
Gross edge$3.00$3.00
Kalshi taker fee$1.68$1.68
Polymarket US taker fee$1.70$2.33
Net, both taker−$0.38−$1.01
Net, Kalshi leg as maker+$1.30+$0.67

The Kalshi fee is 0.07 × 100 × 0.40 × 0.60 = $1.68. The Polymarket US fee is Θ × 100 × 0.57 × 0.43, rounded to the cent. The last row assumes the Kalshi leg rests as a limit order on a market with no maker fee.

Taking both sides loses money. The only version that makes money depends on a resting Kalshi limit order filling before either price moves, which is the leg risk covered below. Even then, it returns $0.67 to $1.30 on $97 committed until the event settles.

Get the free weekly Kalshi flow report

One email every Monday with the past week's Kalshi activity: the largest fills, where size kept accumulating, the biggest movers, and the most traded markets. Numbers and tickers — no picks, no predictions.

Start Complete — $99/month →

You're on the list. The next report goes out Monday.

Settlement rules decide whether it is arbitrage at all

The lock only exists if both contracts pay on the identical event. Each venue writes its own rules. A Kalshi market's rules name the source that determines the outcome. Polymarket US says its markets resolve on the sources listed in each market's rules, and that resolutions are final under its exchange rulebook. Before treating two markets as the same, compare:

  • Source. The same agency, league, news outlet or price index on both sides.
  • Time. The same cutoff, the same timezone, and for price markets the same averaging window.
  • Wording. "Wins the nomination" and "is the nominee" are different contracts that share most of their words.
  • Edge cases. Postponements, cancellations, overtime, and later revisions to official data.

When we matched live Kalshi events to Polymarket questions by shared text, almost every candidate pair was a false match: two markets with nearly the same words that settled on different things. Our Kalshi arbitrage guide describes that experiment. If the two venues settle differently, both legs can lose.

Two orders, two order books, no combined fill

  • No single order covers both venues. You place two orders. The second can fill at a worse price, fill partly, or not fill at all while the first is already done.
  • Size is capped by the thinner book. If one side shows 500 contracts at your price and the other shows 40, you have a 40-pair trade.
  • Limit orders cap the price but not the fill. A limit order will not pay more than you set, but it may fill partly or not at all. See why a Kalshi order does not fill.
  • Visible gaps attract other bots. Public scanners and open-source bots watch the same pairs, so the gaps that remain tend to be small, short-lived, or in markets whose rules do not match.

Your money sits on two venues until settlement

You need funded balances on both venues at once, and the money stays committed until the event settles. Polymarket US says card and ACH deposits take three to four business days to clear before they can be withdrawn, and that withdrawals go back to the original funding method, first in, first out. Kalshi's timing is covered in our deposit and withdrawal guide. In the example above, the best case earns about 1.3% on the money committed, for however long the event takes to settle.

Kalshi is a CFTC-regulated US exchange. Polymarket US is Polymarket's separate, CFTC-regulated US exchange. Polymarket's international platform lists the United States as close-only on both its website and its API: US users can close existing positions there but cannot open new ones. Both US venues have market-integrity rules; for example, Polymarket US bars trading on confidential information about an outcome. Availability can vary by state. This is general information, not legal advice. Our Kalshi vs Polymarket comparison covers the wider differences between the venues.

Where Bot for Kalshi fits

Bot for Kalshi trades Kalshi only. It does not place orders on Polymarket, so it cannot run both legs of a cross-venue trade, and we do not offer it as an arbitrage tool. Our bot catalog lists open-source cross-venue projects, such as ImMike's Polymarket and Kalshi arbitrage scanner and a bot for the hourly Bitcoin markets both venues list. Read the code and test on small size before trusting either one.

If you already have rules for trading Kalshi itself, the no-code Kalshi bot runs them with limit orders by default. None of this is financial advice, and no tool guarantees a profit.

Frequently Asked Questions

Quick answers to common questions about Kalshi vs Polymarket Arbitrage: What's Left After Fees.

Can you arbitrage between Kalshi and Polymarket?

Sometimes, on paper. If the same event trades at different prices, buying YES on one venue and NO on the other pays $1.00 per pair whichever way it settles, as long as both contracts settle on the identical outcome. Near even odds the gap has to be about 3.5¢ to 4.1¢ per pair just to cover both venues' taker fees, and the trade still carries settlement-rule, fill and capital risk.

How big does a Kalshi–Polymarket price gap need to be to profit?

Bigger than the two taker fees combined. At 50¢ on both sides, Kalshi charges 1.75¢ per contract and Polymarket US charges about 1.74¢ at its standard 0.0695 rate or about 2.38¢ at the 0.095 rate it announced for accounts under $10,000 of trailing 30-day taker volume. That is about 3.5¢ to 4.1¢ per pair before slippage or a failed leg. Fees are smaller at prices far from 50¢.

Can US residents arbitrage Kalshi against Polymarket?

Only through Polymarket US, Polymarket's separate CFTC-regulated exchange. Polymarket's international platform lists the United States as close-only on its website and API: US users can close existing positions but cannot open new ones. Availability can also vary by state. This is general information, not legal advice.

Does Polymarket pay more than Kalshi?

No. Both venues pay $1.00 per winning contract and nothing per losing one. What differs is the price you pay for the contract and the fee each venue charges on the trade.

Is Kalshi–Polymarket arbitrage risk-free?

No. The two venues write their own settlement rules and can resolve similar-looking markets differently, the two orders fill separately so one leg can fill while the other moves, and your money sits on both venues until the event settles.

Can Bot for Kalshi run Kalshi–Polymarket arbitrage?

No. Bot for Kalshi trades Kalshi only and does not place orders on Polymarket, so it cannot run both legs of a cross-venue trade. Our bot catalog lists open-source cross-venue projects you can read and test yourself.

Updated November 9, 2026. We keep this guide current as Kalshi's product, fees, and regulatory status change.

Cite this guide

Using this guide in an article or research summary? Please credit Bot for Kalshi and link to this page so readers can check the source and its latest updates.

Bot for Kalshi Team. Kalshi vs Polymarket Arbitrage: What's Left After Fees. Bot for Kalshi. Updated November 9, 2026.

BK

Bot for Kalshi Team

Research & Engineering

The team that builds and operates Bot for Kalshi. We write about prediction-market automation the way we build it: real market mechanics, real fees, real risk controls — no hype.